Physics & Physical Science Demos, Labs, & Projects for High School Teachers

Posts Tagged ‘Hot Air Balloon

Okay, I’ve been a bad boy.  It was more than a year ago I said I would update the post with the instructions.  You guys didn’t call me on it, so I forgot.  The original post is here along with a pdf of the plans I had printed for myself:

Original Tissue Paper Hot Air Balloon Post

The original plans make a balloon that is 60 inches high.  That is perfect for the classroom, it takes three pieces of tissue paper per panel and you need six panels.  You will find I went big on this one and made a 90 inch version for myself.  It is rather unwieldy and difficult to handle, but bigger balloon means bigger lift.  At this point, I can put one of these 60″ balloon together in about an hour, where it takes the kids at least 2 hours.

One of the challenges we ran into was finding the aluminum wire we used to keep the mouth open.  You want this for two important reasons; first, to add ballast; but more importantly, without it, the kids can’t catch the balloons on their heads.  I found the wire at Dick Blick, an art supply store.  They list it under sculpture wire, we use the 14 gauge wire.  It costs $16 for a 350 foot spool.  Each balloon uses about 3 feet.  That’s a lot of hot air balloons.

When it is too windy outside, we tend to launch these in the gym.  I have two heat sources.  The indoor one is a heat gun I purchased from Harbor Freight on sale for $10.  It works great, I make sure I handle it so nobody gets burned.  The outside source is a plumbers propane torch.  Nobody handles that but me, I don’t need to write up any (more) accident reports.  If you are using the torch, make sure the kids keep the balloon opened up, if you aren’t careful you can catch the balloon on fire.  Oops, only did that once, very cool though.  If you do that, light it from the bottom, it goes up into the air and disintegrates … poof.  Bad science teacher.

Some day I may make one of those cool chimney launchers, but then I’ll have to store it in my room.  It’s already looking like Sanford and Sons in my classroom, I don’t know how much more junk I can store.


This is a really enjoyable projects for the students. I’ve done this with kids from 7th grade to 12th grade and always with positive results. Allow two days for the building of these balloons. Use the template design to make a full size template. Even better, make several templates, it will make the project go much faster and smoother.

Hot air balloon on her headThe hot air balloons are almost five feet tall when they are completed. If the students put a little thought into the design, they turn out really colorful. I do this activity when I’m discussing buoyancy. The temperature differential between the air inside the balloon and outside the balloon causes a density difference. The inside air expands due to the heat and becomes less dense. Just like in any liquid, an object less dense than the surrounding medium will float. One of the key points is that air is a medium just like water and that is why the balloon floats. This is not a good activity to do on a hot fall or spring day, a cold, still day is best. If I am in the gym, I use an electric heat gun to generate the hot air. If I go out to the fields (which is way more fun), I take a propane torch and VERY carefully heat the air inside the balloon. Last year I caught one of the balloons on fire. It took off into the sky and burned at the same time. There was nothing left in only a few short seconds.

I used to get the tissue paper on sale after Christmas at craft stores and drug stores. Now I go to the dollar store, they have a pack of about 30 very colorful sheets of wrapping tissue for a dollar (duh). As for the size, you won’t easily find the size sheets called for on the web site. I just have them do their best, but if this concerns you, you can scale the size of the template to match the paper.

You will need: tissue paper, glue sticks, scissors, some string (to close the top), and aluminum wire to keep the mouth open. Try to get aluminum wire, copper is much heavier and will impact their flight.

Some quick tips: They use pins to hold the tissue paper together. I just staple outside the pattern, it’s much quicker and easier. You get about two balloons per glue stick, so have plenty on hand. Good scissors really make a difference with tissue paper. When you go to launch, take a glue stick and some spare tissue paper for patching and field repairs.

Tissue Paper Hot Air Balloon

(These plans were printed off the original site, the original link is dead.)

On the first page you will see part of the template layout.  Do not fret, the last page has both the authors original 60″ template and my super-sized template for a 90″ hot air balloon.  Yes, I made one.  Yes it was awesome, although a little hard to manage.

For some reason, regardless of the age of the kids, they love to catch them on their heads. There is no harm in doing this as long as you did a good job securing the aluminum wire.  Have fun.

What’s New in 2013/2014?

Every year brings a change, this one is no exception.

I will be picking up the sophomore honors Algebra II class to keep them separate from the juniors. This should help accelerate them and put them on a stronger track towards Calculus. Looks like there will be only one section each of Physics and Calculus, but still two of Robotics & Engineering.

Hot topics this year are going to be the Common-Core Standards, Standards-Based Grading (SBG), improving AP Calculus scores, and somehow adding Python, maybe as a club.

Polls in the sidebar

Just a quick poll to help me understand who is stopping by my blog.

Yeah sure, lots from America, but look who else is here…

If you are badly in need of more email or for some reason jonesing for a physics fix, enter your email address so I can bother you with my newest rant on science.

Join 315 other followers

Blog Stats

  • 1,287,440 hits by nerds like me since June 1, 2008
February 2018
« Jan